Recording images (advanced)
46
Taking Pictures using Auto Exposure
(AE) Bracket
Pressing the shutter button once, the camera
will automatically take 3 pictures changing
exposure according to the set exposure
compensation value.
[Preparation]
• Set the mode dial except for
[ ]/[ ]/[ ]. (P23)
1 Press the [ ] button 2 times to
select [ AUTO BRACKET].
2 Press 1, then press 2/1 to set the
exposure compensation range.
•OFF
• j1 EV - i1 EV
(1/3 EV step)
3 Press the 4/[REVIEW/SET] button.
• The compensation window will close.
• The auto bracket indication 1 appears.
4 Take a picture.
• Once you take a picture, auto bracket will be cancelled automatically.
• When flash fires, you can take only 1 picture. Auto bracket setting cannot be
cancelled.
• When setting auto bracket, you cannot take a still picture with audio.
• Depending on the brightness of the subject, the range for which it is possible to
compensate the exposure pictures using auto bracket will be limited.
4
1,2,3
AUTO BRACKET
EXIT
2
SELECT
3
2304
KC93-PP.book 46 ページ ２００３年３月１９日 水曜日 午後２時１１分
To Next Page
Loading...
