Recording images (advanced)
50
To set manually (White set)
Here the white set mode of white balance is
explained.
[Preparation]
• Set the mode dial except for
[ ]/[ ]/[ ]. (P23)
1 Press the [MENU] button.
2 Press 3/4 to select [W.BALANCE].
3 Press 2/1 to set to white set [ ].
Only when setting the white balance again
4 Press 1.
• The message “FRAME THE CAMERA AT
THE WHITE SURFACE AND PRESS
SHUTTER” is displayed.
5 Aim the camera at a sheet of white
paper 1 or similar object so that it
completely fills the frame to white on
the screen and press the shutter
button all the way.
• White balance is set.
6
Press the [MENU] button.
• The menu will disappear.
• When taking a picture with the flash after
setting the white balance manually, the
white balance may not be properly adjusted.
We recommend setting the white balance to
[AUTO] when using the flash.
5
2,3,41,6
REC
1/3
SETUP
QUALITY
SPOT MODE
PICT.SIZE
W.BALANCE
2304
SELECT SET EXIT
MENU
4
2,3
WHITE SET
AT THE WHITE SURFACE
AND PRESS SHUTTER
FRAME THE CAMERA
CANCEL
MENU
KC93-PP.book 50 ページ ２００３年３月１９日 水曜日 午後２時１１分
To Next Page
Loading...
