Basic
27
VQT0V10
• [ASPECT RATIO]/[PICT.SIZE]/[QUALITY]
(P62):
– [ ENLARGE]:
/ (5M)/Fine
–[ 4qk6q/10k15cm]:
/ (2.5M EZ)/Standard
–[ E-MAIL]:
/ (0.3M EZ)/Standard
• [AF MODE] (P63):
[ ] (1-area-focusing)
• [SLOW SHUTTER] (P64):
[1/8–]
• You cannot use the following functions in
simple mode.
– High angle mode
– White balance fine adjustment
– Exposure compensation
– Auto bracket
–[D.ZOOM]
– [COL.EFFECT]
– [PICT.ADJ.]
∫ The Backlight Compensation
Backlight refers to when light comes from
the back of a subject.
In this case, the subject, such as a person,
will become dark.
If you press 3, [] (compensating
backlight ON indication) A appears and the
backlight compensation function is
activated. This function compensates the
backlight by brightening the whole of the
picture.
• If you press 3 while [ ] is displayed,
[ ] disappears and the backlight
compensation function is canceled.
• We recommend using the flash when you
use the backlight compensation function.
(When using the flash, it is fixed to Forced
ON [ ].)
• The flash setting is fixed to AUTO/
Red-eye reduction [ ] when the
backlight compensation function is set to
[OFF].
3
BACKLIGHT
3
BACKLIGHT
VQT0V10ENG.book 27 ページ ２００５年１２月２７日 火曜日 午後８時３４分
To Next Page
Loading...
