Advanced
49
VQT0V10
• Press 2 and then press 3/4 in the
[SCENE MODE] menu to select either the
[REC] menu icon [ ] (P59) or the
[SETUP] menu icon [ ] (P19) and set the
desired items.
• The following cannot be set in scene
mode because the camera automatically
adjusts them to the optimal setting.
– [W.BALANCE]
– [SENSITIVITY]
– [COL.EFFECT]
– [PICT.ADJ.]
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P48)
The person stands out from the
background and has a healthier
complexion.
∫ Technique for Portrait mode
To increase the effective of this mode:
1 Rotate the zoom lever as far as possible
to Tele.
2 Move close to the subject to make this
mode more effective.
• This mode is only suitable when taking
pictures outdoors in the daytime.
• ISO sensitivity is fixed to [ISO80].
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P48)
The camera detects the face or skin area to
achieve a smoother appearance of the skin
than portrait mode.
∫ Technique for Soft skin mode
To make this mode more effective:
1 Rotate the zoom lever as far as possible
to Tele.
2 Move close to the subject to make this
mode more effective.
• This mode is only suitable when taking
pictures outdoors in the daytime.
• If a part of the background etc. is a color
close to skin color, this part is also
smoothed.
• This mode may not be effective when
there is insufficient brightness.
• ISO sensitivity is fixed to [ISO80].
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P48)
The camera focuses preferentially on a
distant subject. This allows you to take
pictures of a wide landscape.
• The focus range is 5 m (16.4 feet) to ¶.
• The flash setting is fixed to Forced OFF
[].
Portrait mode
MENU
SET
3
Soft skin mode
Scenery mode
MENU
SET
3
MENU
SET
3
VQT0V10ENG.book 49 ページ ２００５年１２月２７日 火曜日 午後８時３４分
To Next Page
Loading...
