EasyManua.ls Logo

Panasonic Lumix DMC-LS2

Panasonic Lumix DMC-LS2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced
51
VQT0V10
The flash setting is fixed to Forced OFF
[].
ISO sensitivity is fixed to [ISO80].
You cannot set the slow shutter.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P48)
This mode allows you to take pictures of
food with a natural hue without being
affected by the ambient light in restaurants
etc.
The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
30 cm (0.98 feet) (Tele) to ]
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P48)
Select this mode when you want to take
pictures at a wedding reception, indoor
party etc. By using the flash and slowing
down the shutter speed, both people and
the background can be recorded with a
brightness close to real life.
Technique for Party mode
Since the shutter speed becomes slower,
we recommend using a tripod and the
self-timer (P41) for taking pictures.
We recommend rotating the zoom lever to
Wide (1k) and being about 1.5 m
(4.92 feet) from the subject when taking
pictures.
The flash setting can be set to Slow sync./
Red-eye reduction [ ] or Forced ON/
Red-eye reduction [ ].
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P48)
This mode allows you to take pictures with
a candle-lit atmosphere.
Technique for Candle light mode
If you make the most of the candle light,
you can take successful pictures without
using the flash.
We recommend using a tripod and the
self-timer (P41) for taking pictures.
The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
30 cm (0.98 feet) (Tele) to ]
The flash setting can be set to Slow sync./
Red-eye reduction [ ] or Forced ON/
Red-eye reduction [ ].
Food mode
Party mode
MENU
SET
3
MENU
SET
3
Candle light mode
MENU
SET
3
VQT0V10ENG.book 51 ペー 005年12月27日 火曜日 午後8時34

Table of Contents

Related product manuals