Connecting to other equipment
76
VQT0V10
• If you are connecting the camera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by Windows Plug and
Play. The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [LUMIX] when
you connect the camera with no card
inserted.
• The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card inserted.
∫ Folder Composition
Folders are displayed as shown in the
following illustration.
1 Folder number
2 File number
3 JPG: pictures
MOV: motion pictures
The items in each folder are as follows.
• The data for up to 999 pictures recorded
by the camera can be included in 1 folder.
If the number of pictures exceeds 999,
another folder is created.
• To reset the file number or the folder
number, select [NO.RESET] in the
[SETUP] menu. (P21)
∫ Conditions under which a different
folder number is used
In the following cases, the picture is not
recorded in the same folder as the
previously recorded picture. It is recorded
in a folder with a new number.
1 When the folder just recorded to contains
a picture file with the number 999 in it
(example: P1000999.JPG).
2 When the card just recorded to contains,
for example, a folder with the number
100 (100_PANA) in it and that card is
removed and replaced with a card that
has a folder with the number 100 in it
recorded by a camera from a different
maker (100XXXXX, with XXXXX being
the name of the maker) and then a
picture is recorded.
3 When recording after selecting
[NO.RESET] (P21) from the [SETUP]
menu. (Pictures will be recorded to a
new folder with a number sequential to
the folder recorded to immediately
before. By using [NO.RESET] on a card
that does not contain folders or pictures,
such as one just formatted, the folder
number can be reset to 100.)
∫ PictBridge (PTP) setting
Even if you set [USB MODE] to
[PictBridge (PTP)], you can connect to your
PC if the OS is Windows XP Home Edition/
Professional or Mac OS X.
• Pictures can only be read on the camera.
They cannot be written to a card or
deleted.
• When there are 1000 or more pictures on
a card, the pictures may not be imported.
DCIM Folders from [100_PANA] to
[999_PANA]
100_PANA
to
999_PANA
Pictures/motion pictures
MISC Files on which the DPOF
print settings are recorded
100_PANA
101_PANA
999_PANA
DCIM
MISC
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA
≥Built-in memory
≥SD Memory Card
≥MultiMediaCard
1
23
VQT0V10ENG.book 76 ページ ２００５年１２月２７日 火曜日 午後８時３４分
To Next Page
Loading...
