19
SQT1404 (ENG)
Basics
Control ring/Aperture ring/Rear dial
You can perform frequently used operations and settings directly.
• You can adjust the aperture using the aperture ring. Gently turn the aperture ring
until it snaps into place with an audible click. (The aperture can be set between
[1.4] and [11].)
• Items that can be set by the control ring/rear dial vary depending on recording
modes. Following are the pre-assigned settings.
Mode dial
Control ring
1
Rear dial
Step Zoom —
Step Zoom Programme Shift
Step Zoom —
Step Zoom Shutter speed adjustment
Step Zoom Shutter speed adjustment
Step Zoom
Shutter speed adjustment
2
Step Zoom
Shutter speed adjustment
3
/
Picture effects change —
1
When Manual Focus is set, the control ring is assigned to focus adjustment.
2
The operation is possible only when [Exposure Mode] is set to [S] or [M].
3
The operation is possible only when the Scene Guide Mode is set to [Artistic Nightscape].
●
You can change the assigned operation of the control ring and rear dial from
[Ring/Dial Set] in the [Custom] menu. For details, refer to “Operating Instructions
for advanced features (PDF format)”.
To Next Page
Loading...
Need help?
General
