- 28 - VQT4K62
Taking pictures with your own settings
[Program AE] Mode
Recording mode:
Set to ([Program AE] Mode)
Take a picture
Press halfway
(press lightly to focus)
Press fully
(press the button all the
way to record)
Focus display
(When focus is aligned:
illuminated
When focus is not
aligned: flashing)
Using the [Rec] menu to change settings and set up your own recording environment.
●
If a warning is displayed about jitter, use [Stabilizer], a
tripod, or [Selftimer].
●
If aperture and shutter speed are shown in red, you
do not have appropriate exposure. You should either
use the flash or change [Sensitivity] settings.
Jitter alert
display
Aperture value Shutter speed
To Next Page
Loading...
