- 99 - VQT4K62
Printing
You can connect directly to a PictBridge-compatible printer for printing.
• Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.
Getting Ready:
• Use batteries with sufficient power.
• When printing pictures from the built-in memory, remove any memory cards.
• Adjust the print quality or other settings on your printer, as needed.
• Turn on the camera and printer.
Connect camera to printer
Check the plug direction and insert it straight in.
(Damage to plug can lead to faulty operation.)
Do not disconnect the USB connection
cable when the cable disconnection icon
is displayed (may not be displayed with
some printers).
USB connection cable
(always use cable supplied)
Use cursor button on the camera to select [PictBridge(PTP)],
and press [MENU/SET]
Use cursor button to select a picture to print and press
[MENU/SET]
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→101))
■
To cancel print Press [MENU/SET].
(Continued on the next page)
To Next Page
Loading...
