- 12 - VQT4K62
Attaching the lens cap/shoulder strap
Attaching the lens cap
When you turn the camera off or carry the camera, attach the lens cap (supplied) to
protect the surface of the lens.
Pass the lens cap string through
the shoulder strap eyelet on the
camera body
• Attach the lens cap string before attaching
the shoulder strap.
• Pass the shorter loop of the string through
the eyelet.
Pass the lens cap string through the lens cap eyelet
• Pass the lens cap through the loop of the string and tighten it.
Attach the lens cap
●
Do not hang or swing around this unit.
●
Make sure to detach the lens cap when turning on the power.
●
Be careful not to lose the lens cap.
●
Be careful that the lens cap string does not become entangled with the shoulder strap.
To Next Page
Loading...
