- 45 - VQT4K62
Using the [Setup] menu
Item Settings, notes
[Battery]
Specify the battery
type so that the correct
remaining battery power
will be displayed.
[Alkaline] / [Ni-MH]
Select the type of batteries used.
[Clock Set]
(→23, 24)
Set time, date, and display format.
[Beep]
Change or mute the
beep/shutter sounds.
/ / : Low / High / Mute
[Volume]
Adjust volume of sound
from speakers (7 levels).
[0] / [1] / [2] / [3] / [4] / [5] / [6]
• Cannot be used to adjust TV speaker volume when
connected to TV.
Also, the camera speaker will not emit any sound.
[LCD Display]
Adjust brightness and
colour of the LCD
monitor.
Press to select the setting item and press to
make adjustments
Press [MENU/SET]
• Some subjects may look different from their actual
appearance, but the recorded picture will not be affected.
• Cannot be used to set brightness and contrast when
[High Angle] is selected under [LCD Mode].
[Clock Set], [Economy] and [Auto Review] are important for clock setting and
battery life. Please check these before use.
• For details about the setting procedure in the [Setup] menu (→42)
To Next Page
Loading...
