- 46 - VQT4K62
Using the [Setup] menu
Item Settings, notes
[LCD Mode]
Make LCD monitor easier
to see.
[Auto Power LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
[Power LCD]:
Makes screen brighter than normal (for outdoor use).
[High Angle]:
Makes the LCD monitor screen easier to see when the
camera is held above eye level.
[OFF]
• Cannot select [Auto Power LCD] and [High Angle] in
playback mode.
• [Power LCD] returns to ordinary brightness if there is no
operation for 30 seconds when recording. (Press any
button to make the screen brighter again.)
• [High Angle] will be cancelled when power is turned off
(including [Auto Power Off]).
• Setting [LCD Mode] reduces the operating time.
• Because the picture shown on the LCD monitor screen
emphasises brightness, some subjects may look different
than their actual appearance, but this will not affect the
recorded picture.
• For details about the setting procedure in the [Setup] menu (→42)
To Next Page
Loading...
