- 16 - VQT4K62
Inserting and removing the batteries
Turn off the camera.
■
To remove batteries
Tilt the camera and catch the batteries in your hand.
Be careful not to drop them.
●
To remove the batteries, turn the camera off and wait until the LUMIX indicator on the
LCD monitor goes off. (Failure to wait may cause the camera to malfunction and may
damage the card or recorded data.)
●
Be sure to remove the batteries if you are not using the camera for a long period of
time. Batteries may be hot immediately after use. Turn off the camera and wait until
the battery temperature lowers before removing them.
●
The clock settings may reset if batteries are removed from the camera for 120 hours
or more.
●
Always use all new batteries of the same type and brand when replacing batteries.
To Next Page
Loading...
