- 12 -
Preparation
1
Slide the release lever in the direction
of the arrow and open the card/battery
door.
• Always use genuine Panasonic batteries.
• If you use other batteries, we cannot
guarantee the quality of this product.
2
Being careful about the battery
orientation, securely insert it all the
way in, and then check that it is locked
by the lever A.
To remove the battery, move the lever
A in the direction of the arrow.
3
1: Close the card/battery door.
2: Slide the release lever in the
direction of the arrow.
• Turn the camera off and wait for the “LUMIX” display on the monitor to clear before removing the
battery.
(Otherwise, this unit may no longer operate normally and the card itself may be damaged or the
recorded pictures may be lost.)
Inserting the Battery
To Next Page
Loading...
