- 9 -
Preparation
Attaching the Lens Cap/Shoulder Strap
• When you turn the camera off or carry the camera, attach the lens cap to protect the surface of the
lens.
1
Pass the string through the hole at the shoulder
strap eyelet.
A: Shoulder strap eyelet
2
Pass the same string
through the hole on
the lens cap.
3
Attach the lens cap.
• Do not hang or swing around this unit.
• Make sure to detach the lens cap when turning this unit
on.
• Be careful not to lose the lens cap.
• Be careful that the lens cap string does not become
entangled with the shoulder strap.
Attaching the Lens Cap
To Next Page
Loading...
Need help?
General
