- 50 -
Recording
Taking Pictures Using the Built-in Flash
Applicable modes:
∫ To open/close the flash
•
Be careful not to catch a finger when closing a flash bulb.
• Be sure to close the flash when not in use.
• The flash setting is fixed to [Œ] while the flash is closed.
• Be sure to keep the flash clean, clear of dust and avoid exposure to anything sticky. This may cause
the flash to stick and not open.
• You cannot close the flash by pushing the microphone or its periphery.
Forcibly closing the flash can damage the camera.
Set the flash to match the recording.
•
Open the flash.
1
Press 1 [‰].
A To open the flash
Press [ ].
B To close the flash
Push the top of the flash cover until it clicks.
Switching to the appropriate flash setting
To Next Page
Loading...
