- 23 -
Preparation
Select [Clock Set] on the [Setup] menu and then press [MENU/SET]. (P38)
•
The clock can be reset as shown in steps 5 and 6.
• The clock setting is maintained for about 7 days using the built-in clock battery even without
the battery.
(Leave the charged battery in the unit for 2 hours to charge the built-in battery.)
• If the clock is not set, the correct date cannot be printed when you order a photo studio to print the
picture, or when you stamp the date on the pictures with [Date Stamp].
Changing the Clock Setting
To Next Page
Loading...
