- 140 -
Wi-Fi
You can select the method for connecting to the device you are using.
Select the connection method supported by your device.
Connecting directly
Connection method Description of settings
[Wi-Fi Direct]
1 Set the device to Wi-Fi Direct
TM
mode.
2 Press 3/4 to select [Wi-Fi Direct] and then press [MENU/
SET].
3 Press 3/4 to select the device to connect to, and then
press [MENU/SET].
•
Read the operating instructions of your device for details.
[WPS Connection]
[WPS (Push-Button)]
1 Press 3/4 to select [WPS (Push-Button)] and then press
[MENU/SET].
2 Set the device to WPS mode.
•
You can wait longer for a connection by pressing the [DISP.] button
on this unit.
[WPS (PIN code)]
1 Press 3/4 to select [WPS (PIN code)] and then press
[MENU/SET].
2 Enter the PIN code of the device into this unit.
[Manual Connection]
Enter the SSID and password into the device. The SSID and
password are displayed on the connection waiting screen of
this unit.
To Next Page
Loading...
