- 168 -
Wi-Fi
How to Use the [Wi-Fi Setup] Menu
For details on how to select the [Wi-Fi] menu settings, refer to P44.
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
1 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P44)
2 Press 3/4 to select item, and press [MENU/SET].
•
Refer to P159 for details.
• Refer to P163 for details.
• For details on how to enter characters, refer to “Entering Text” section on P80.
• If you are using the PC with standard settings, you do not need to change the workgroup.
• For details on how to enter characters, refer to “Entering Text” section on P80.
• Up to 32 characters can be entered for [A], [a], [1], and [&].
[Smart Transfer] —
[LUMIX CLUB]
Acquires or changes the “LUMIX CLUB” login ID.
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as the
destination PC is required.
(The default setting is “WORKGROUP”.)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
Close the menu after changing settings.
[Restore to Default]:
Restores the default state.
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
[Device Name]
You can change the name of this unit.
1 Press [DISP.].
2 Enter the desired device name.
To Next Page
Loading...
