- 159 -
Wi-Fi
To transfer images automatically ([Smart Transfer])
Transfer recorded images to a PC, an AV device or a Cloud Folder automatically.
•
When [Auto Transfer] is set to [ON], the camera automatically uploads recorded images. For this
reason images may be uploaded unintentionally if, for example, you share this unit with other
people. Panasonic assumes no responsibility for any damages caused by uploaded images.
• Panasonic assumes no responsibility for any damages caused by the use of [Smart Transfer].
• When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to [ON], and
turn off the camera because electromagnetic waves, etc. emitted by the camera may interfere with
gauges. (P48)
∫ What you can do with [Smart Transfer]
1 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P44)
2 Press 3/4 to select [Smart Transfer], and press [MENU/SET].
3 Press 3/4 to select the transfer destination, and press [MENU/SET].
4 Select the method for connecting to a wireless access point, and set.
•
Refer to P138 for details.
5 Set the transfer destination.
6 Press 3/4 to select [Auto Transfer], and press [MENU/SET].
7 Press 3/4 to select [ON], and press [MENU/SET].
•
Only the images you recorded when [Auto Transfer] is set to [ON] is transferred.
[Auto Transfer] Automatically transfer images during charging. (P160)
[Transfer Now] Transfer images to the preset destination immediately. (P160)
[Set Destination] Change the transfer destination or settings of images. (P161)
[Charge Priority] Set priority to charge or transfer. (P162)
[Display Log]
Display the dates when images were sent automatically and the send results.
(P162)
Configuring [Smart Transfer]
[PC] setting
•
For details about the preparations before the transfer, refer to “When sending images to
PC” on P146.
1 Press 3/4 to select a PC you want to connect, and then press [MENU/SET].
2 Press 3/4 to select the folder you want to send, and then press [MENU/SET].
[Cloud Sync. Service] setting
•
For details about the preparations before the transfer, refer to “When sending images to
[Cloud Sync. Service]” on P148.
[AV device] setting
•
For details refer to “When sending images to AV device” on P150.
• Select the AV device you want to connect to, and press [MENU/SET].
To Next Page
Loading...
