- 22 -
Preparation
Note
•
Remove the battery after use.
• The battery will be exhausted if left for a long period of time after being charged.
• Turn the camera off and wait for the “LUMIX” display on the LCD monitor to clear before
removing the card or battery. (Otherwise, this unit may no longer operate normally and the card
itself may be damaged or the recorded pictures may be lost.)
About the water leakage warning message
To maintain the waterproof performance of this unit, a message prompting to check for any
foreign material inside the side door or to perform maintenance is displayed along with a
warning sound when the following are performed. (P173)
•
When the power is turned on after opening the side door and replacing the card.
• When the power is turned on after opening the side door and replacing the battery.
Note
•
After opening the side door, close it securely taking care not to get any foreign objects caught.
• If there is any foreign object, remove it with attached brush.
• Warning message display can be forcefully turned off by pressing any button.
To Next Page
Loading...
Need help?
General
