Preparation
- 23 -
The AC Adaptor (optional) can only be used with the
designated Panasonic DC coupler (optional). The AC
adaptor (optional) cannot be used by itself.
Open the side door .
Insert the DC coupler, being careful of the direction.
Plug the AC adaptor into an electrical outlet.
Connect the AC adaptor to the [DC IN] socket of
the DC coupler.
•
Ensure that only the AC adaptor and DC coupler for this
camera are used. Using any other equipment may cause
damage.
Note
•
Always use a genuine Panasonic AC adaptor (optional).
• When using an AC adaptor, use the AC cable supplied with the AC adaptor.
• Side door cannot be closed while the AC adaptor is connected.
• Some tripods cannot be attached when the DC coupler is connected.
• Do not apply any force to the side door with the weight of the cable or your hand when
the AC adaptor is connected. It may cause damage.
• The DC coupler may get disconnected from this unit if a cable is pulled when connecting
the AC adaptor, so take caution.
• Also read the operating instructions for the AC adaptor and DC coupler.
• Waterproof function does not operate when the AC adaptor is connected.
Using an AC adaptor (optional) and a DC coupler (optional) instead of the battery
ロヰヤレ
モヷチヰヶヵチバチュリヨリヵモロ
To Next Page
Loading...
Need help?
General
