GPS/Sensor
- 116 -
When the GPS begins positioning, an icon indicating the
positioning status is displayed on the recording screen.
When the positioning is successful, the location name
information and latitude/longitude are displayed.
A Location name information
B Icon indicating positioning status
C Icon indicating positioning results
∫ About the Icon indicating positioning status
Positioning is performed by this unit when radio waves from 3 or more GPS satellites are
received.
•
The bar moves up the scale according to the number of GPS satellites from which signals are
being received.
When the bar has filled the scale and positioning has been successful, the indicator goes blue.
• Even when reception is good, there may be times when positioning is not possible due to the
status of the GPS satellites. In this case, we recommend performing [Repositioning] (P118).
∫ About the Icon indicating positioning results
About the display of positioning status and positioning results
Elapsed time after successful positioning
[]Within the last 5 minutes
[]Between 5 minutes and 1 hour ago
[]Between 1 hour and 2 hours ago
[]More than 2 hours ago
[]When positioning was not possible
To Next Page
Loading...
