- 131 -
GPS/Sensor
Applicable modes:
Restricting the GPS/sensor functions
When [GPS Setting] or [Sensor Settings] is set to [ON], the GPS and sensor continue
working when the power is turned off. Set [Airplane Mode] to [ON] to prevent GPS
positioning and acquisition of direction/altitude/atmospheric pressure information when the
power is turned off.
Select [Airplane Mode] on the [GPS/Sensor] menu, and then press
[MENU/SET].
Press 3/4 to select [ON], and then press [MENU/SET].
• Exit the menu after it is set.
Note
•
When both [GPS Setting] and [Sensor Settings] are set to [OFF], [Airplane Mode] is fixed to
[OFF].
Disabling the GPS/sensors when the power is turned off
To Next Page
Loading...
