Panasonic Lumix DMC-TS4 - Setting Date;Time (Clock Set)

- 27 -
Preparation
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
Press camera [ON/OFF] button.
• If the language select screen is not displayed,
proceed to [Requirements for Underwater use] below.
Press [MENU/SET].
Press 3/4 to select the language, and press [MENU/SET].
Press [MENU/SET].
Press 2/1 to select the items (year,
month, day, hour, minute, display
sequence or time display format), and
press 3/4 to set.
A: Time at the home area
B: Time at the travel destination
•
You can cancel without setting the clock by pressing
[].
[Requirements for Underwater use]
Be sure to check this so that you can maintain the waterproof performance.
[Please set the clock] is displayed after viewing the last screen.
For details, refer to P9.