Basic
- 58 -
x [USB Mode]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
[y] ([Select on connection]):
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
[{] ([PictBridge(PTP)]):
Set after or before connecting to a printer supporting PictBridge.
[z] ([PC]):
Set after or before connecting to a PC.
Set to match the type of TV.
| [Output]
[ ] ([TV Aspect]):
[W]:
When connecting to a 16:9 screen TV.
[X]:
When connecting to a 4:3 screen TV.
• This will work when the AV cable (supplied) is connected.
To Next Page
Loading...
