21
(ENG) VQT4U14
When the displayed location name information is different from the current location or
when the positioning is not successful, move to a location where the radio waves from
GPS satellites can be received better and perform the positioning update.
Press [MENU/SET].
Press 3/4/2/1 to select [GPS/Sensor] menu, and then press
[MENU/SET].
Press 3/4 to select [Repositioning], and then press [MENU/
SET].
•
Positioning is started and the current location information is updated once the
positioning is successful.
When used during overseas travel etc.
• The GPS may not operate in China or close to the Chinese border in neighbouring countries.
(As of January 2013)
• The usage of GPS, etc., may be restricted depending on the country or the region. This
camera has a GPS function, so check with the embassies or travel agencies etc. prior to your
overseas travel regarding any restrictions on cameras with a built-in GPS function.
Update the GPS information
DMC-FT5&TS5GH-VQT4U14_eng.book 21 ページ ２０１３年１月３０日 水曜日 午後１２時８分
To Next Page
Loading...
