Wi-Fi/NFC
Operating the camera using a smartphone/tablet
VQT5E85
- 191 -
Operate the smartphone
• When the connection is complete, live images being captured by the camera are
displayed on the smartphone.
(It may take some time after the operation for the connection to be established.)
• The connection method differs depending on the smartphone used.
<Using an iOS device>
●
When reading a QR Code to connect
(Steps to are not necessary when reconnecting.)
Start “Image App” (→189)
Select [QR Code] → [OK]
Read the QR Code displayed on this unit with “Image App”
Install the IMAGE APP profile
Select [Install]
*
, then select [Install Now]
*
→ [Done]
*
.
The message is displayed in the Web browser.
• If a passcode is required to unlock the smartphone, you will have to
input the passcode.
Press the home button to close the Web browser
Select [Wi-Fi]
*
under [Settings]
*
on the smartphone
Turn on [Wi-Fi]
*
and select the SSID displayed on this unit
Return to the home screen and start “Image App” (→189)
*
The display may differ depending on the system language setting.
(Continued on the next page)
To Next Page
Loading...
