96 VQT1Z82 VQT1Z82 97
For the PLAYBACK menu setting procedure, see P.18.
Using PLAYBACK menu
(Continued)
REC/PLAY switch: (Set mode dial to any except )
PRINT SET
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at shop to check compatibility)
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Set-up: Press ‘MENU/SET’ → ‘ PLAYBACK menu’ → Select ‘PRINT SET’
Select ‘SINGLE’ or ‘MULTI’
Select picture
SINGLE MULTI
Set number of pictures
(repeat steps and when using ‘MULTI’ (up to 999 pictures))
SINGLE MULTI
No. to print
Date print
set
No. to print
Date print set
• Date print setting/release → Press display button.
• After confirmation, press
to return to the menu screen.
To release all Select ‘CANCEL’ in step and select ‘YES’.
When using PictBridge-compatible printers, check settings on actual printer as these
may take priority over camera settings.
To print from built-in memory at a shop, first copy pictures to card (P.98) before making
settings.
DPOF print settings may not be made to non-DCF (P.40) files.
Some DPOF information set by other equipment cannot be used. In such cases, delete
all of the DPOF information and then set it again with this camera.
Date printing settings cannot be made for pictures with a ‘TEXT STAMP’ applied. These
settings will also be canceled if a ‘TEXT STAMP’ is applied later.
Motion pictures recorded in ‘AVCHD Lite’ format cannot be set.
PROTECT
Set protection to disable picture deletion. Prevents deletion of important pictures.
Set-up: Press ‘MENU/SET’ → ‘ PLAYBACK menu’ → Select ‘PROTECT’
Select ‘SINGLE’ or ‘MULTI’
Select picture and make setting
SINGLE MULTI
Picture protected
Picture protected
• To cancel → Press
‘MENU/SET’ again.
• After confirmation,
press to return to
the menu screen.
To release all Select ‘CANCEL’ in step and select ‘YES’.
To cancel while releasing all Press ‘MENU/SET’.
May not be effective when using other devices.
Formatting will cause even protected files to be deleted.
AUDIO DUB.
Add audio to previously taken pictures.
Set-up:
Press ‘MENU/SET’ → ‘ PLAYBACK menu’ → Select ‘AUDIO DUB.’
Select image and start recording
Do not block
microphone with
fingers.
For files already containing audio,
select whether or not to overwrite
existing audio with ▲▼, and press
‘MENU/SET’.
• To cancel → Press
Stop recording (Recording will automatically end after 10 seconds.)
• After confirmation, press to return to the menu
screen.
Cannot be used with motion pictures or protected pictures.
May not be compatible with pictures taken on other devices.
To Next Page
Loading...
Need help?
General
