- 19 -
Setting the clock
To change time setting
When resetting date and time, select [Clock Set] from the [Setup] menu.
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in the camera for 24 hours beforehand.
Select [Clock Set] from the [Setup] menu or [Rec] menu (→39)
Set the date and time (Perform steps - . (→18))
●
If the clock is not set, the correct date cannot be printed when you order a photo studio
to print the picture, or when you stamp the date on the pictures with [Date Stamp] or
[Text Stamp].
●
If the clock is set, the correct date can be printed even if the date is not displayed on
the screen of the camera.
To Next Page
Loading...
