6.2.2.7. Installation of Shading Sheet
1. Install Shading Sheet to Ring Mount Base Unit
Mount
Rubber
1. Install Mount Rubber
2. Install L Mount
3. Tighten screw (C) by using the torque driver with specified torque.
- Screw(C) × 5
- Torque : 20±1.2Ncm
6.2.2.8. Installation of L Mount
6.2.2.9. Installation of Shading Frame
1. Install Shading Frame and tighten screw (A) by using the torque
driver with specified torque.
- Screw(A) × 3
- Torque : 10±1Ncm
Screw (C)
Screw (A)
4. Fix Lens Contact unit to
L Mount by tighten screw(B)
using torque driver with
specified torque.
- Screw(B) ×2
- Torque : 6±1 Ncm
Screw (B)
7mm
SILVER
The matte surface is the back side.
Mount Contact
To Next Page
Loading...
