6.1.2.1. Removal of Shading Frame
6.1.2. Disassembly Procedure
Important Notice：
- Perform lens disassembly in the clean room (class 10,000 / Federal Standard 209D) since lens is delicate product
and it dislikes a dust.
1. Remove 3 Screws (A)
2. Remove the Shading Frame
6.1.2.2. Removal of L Mount and Mount Rubber
2. Remove 5 Screws (C)
3. Remove L Mount
4. Remove Mount Rubber
1. Remove 2 Screws (B)
Screw(A)
Screw(B)
Screw(C)
Mount Rubber
SILVER
7mm
Screw(A)
< Preparation >
- Set the zoom position to WIDE end (24mm).
- Put the Lens so that the line of zoom comes towards you.
To Next Page
Loading...
