Firmware Ver. 2.0 – Extended Functions
F-9
• You will need compatible software to edit the RAW Video Data recorded with the
external recorder.
• When editing RAW video data that was recorded with an ATOMOS recorder, in order
to match the coloring with the V-Log/V-Gamut, download the LUT (Look-Up Table)
file from the following support site and load it into the software.
• Visit the following site to download LUT file or view the latest support information:
https://panasonic.jp/support/global/cs/dsc/
(English only)
• Video cannot be recorded to cards while RAW Video Data is being output via
HDMI.
• When [System Frequency] is set to [24.00Hz (CINEMA)], RAW Video Data
cannot be output via HDMI.
To Next Page
Loading...
