Firmware Ver. 2.0 – Extended Functions
F-10
Outputting RAW Video Data via HDMI
The image quality for the output images is set in [Rec Quality].
Getting started:
1 Turn off the camera and the external recorder.
2 Connect the camera and the external recorder with a commercially available
HDMI cable.
• Use a Premium High Speed HDMI cable (Type A–Type A plug, up to 1.5 m
(4.9 feet) long).
3 Turn on the camera and the external recorder.
1
Set the mode dial to [ ].
2
Set [HDMI RAW Data Output].
≥ [] [] [HDMI RAW Data Output] [ON]
•
[HDMI RAW] is displayed on the recording screen.
To Next Page
Loading...
