Firmware Ver. 3.0 – Compatible with Frame.io Camera to Cloud
F-45
Connecting with Frame.io
[] [] [Frame.io] [Frame.io Connection]
Select [ON]
≥ Perform [Wi-Fi Connection Setting] and [Pairing(Frame.io)] when
connecting for the first time.
[Wi-Fi Connection Setting]
Select [New connection] and connect via Wi-Fi to the access point.
[Pairing(Frame.io)]
A pairing code is displayed on the camera.
Log into Frame.io from a PC, etc., and enter the pairing code in the device registration
screen.
•
This can also be set by selecting [Frame.io Connection] [SET]
[Pairing(Frame.io)].
To Next Page
Loading...
