Firmware Ver. 3.0 – Compatible with Frame.io Camera to Cloud
F-46
•
You can view the [Status] in relation to Frame.io in the [Frame.io] menu screen.
– [NOT CONNECTED]: Connection with Frame.io not started
– [CONNECTING]: Currently trying to connect with Frame.io (incomplete)
– [CONNECTED]: Connection with Frame.io completed
– [CONNECTED(PAUSED)]: Camera connection has been paused on the Frame.io
site
•
The user name ([User]) and project name ([Project]) are displayed on the camera
when the connection is completed.
•
If connection with Frame.io fails repeatedly (authentication failure), try the pairing
setting procedure again.
•
If it is not possible to connect with Frame.io, check the connection method and
then try setting [Frame.io Connection] to [ON] again.
•
Depending on the status of the camera, connections may be temporarily
interrupted or it may take some time to transfer images.
•
When the following functions are being used, [Frame.io] is not available:
– [Auto Transfer]
– [USB]
– Tethered recording
•
When [Frame.io Connection] is set to [ON], the following functions are not
available:
– [Auto Transfer]/[Send Image (Smartphone)]/[Pairing] ([Delete])/[Wi-Fi network
settings] ([Bluetooth])
– [Wi-Fi Function]
– Tethered recording
– [Video Repair]
To Next Page
Loading...
