18
MAINTENANCE
Defrosting
Use the scraper provided for removing the frost if the freezer operation must be continued. Pay attention
not to impact or damage the inner wall.
1. When defrosting, move all the contents of containers in the freezer to another low temperature freezer.
2. Pressing the defrost key (DEF) for more than five seconds to stop the refrigerating operation.
While the refrigerating operation is stopped, the current chamber temperature and dF is displayed on the
control panel alternately.
3. After a several hours, check the visually that all defrost was removed completely.
4. If a defroster is finished, a drain cap at bottom inside the freezer is removed.
Draw drain hose, and drain the water with water inside the freezer in the tray.
Wipe the water left in the freezer, and do the cap.
5. Pressing about 5 seconds the defrost key (DEF), the refrigerating operation can be started.
6. Once the chamber temperature has dropped to the desired temperature, place the original contents
back in the freezer chamber.
Note:
After the defrosting, the refrigerating is never resumed automatically.
Make sure to press the defrost key (DEF) for more than five seconds to start operation again.
To Next Page
Loading...
