30
SPECIFICATIONS
Product name
Biomedical Freezer
MDF-U731
External dimensions W770 mm x D830 mm x H1955 mm
Internal dimensions W650 mm x D700 mm x H1370 mm
Effective capacity 623 L
Exterior Painted steel
Interior Painted steel
Door Painted steel
Lock 1
Insulation Rigid polyurethane foamed-in place
Shelf
Polyethylene coated wire
4 pieces
Size: W626 mm x D620 mm Max. load: 50 kg/shelf
Access port
Diameter 30 mm, 1 port on left side
1 port on the top of unit
Cooling method Forced air circulation
Compressor Hermetic type, 400 W
Evaporator Fine and tube
Condenser Skin condenser type
Refrigerant R-404A
Defrosting Heater defrosting
Temperature controller Electronics controller
Temperature display Digital display (between -40
o
C and +0
o
C)
Temperature sensor Thermister sensor
Alarm & safety
High temp. alarm, Low temp. alarm, Power failure alarm, Door alarm,
Compressor temperature alarm, Thermal sensor abnormality
Memory backup Nonvolatile memory
Weight
155 kg
Battery Nickel-metal-hydride battery, DC 6 V, 1500 mAh, Auto-recharge (DRTB315005)
Accessories
1 set of key, 1 Inspection label, 4 of plastic screws,
2 large & 2 small nylon clips (for temperature recorder)
Caster 4
Leveling foot 2
Optional component
Temperature recorder (MTR-G85A)+Recorder fixing (MPR-S7),
Temperature recorder (MTR-4015LH)+ Recorder fixing (MPR-S30)
• Design or specifications will be subject to change without notice.
• Refer to the updated catalog when ordering an optional component.
To Next Page
Loading...
