1
CONTENTS
INTRODUCTION P. 2
PRECAUTIONS FOR SAFE OPERATION P. 3
ENVIRONMENTAL CONDITIONS P. 7
FREEZER COMPONENTS P. 8
Control panel P.10
REMOTE ALARM TERMINAL P.11
AIR INTAKE PORT P.11
INSTALLATION SITE P.12
INSTALLATION P.13
START-UP OF UNIT P.14
CHAMBER TEMPERATURE SETTING P.15
KEY LOCK FUNCTION P.15
ALARM TEMPERATURE SETTING P.16
SETTING OF ALARM RESUME TIME P.17
SETTING OF COMPRESSOR DELAY TIME P.18
ALARMS & SAFETY FUNCTIONS P.19
ROUTINE MAINTENANCE P.20
Cleaning of cabinet P.20
Cleaning of condenser filter P.20
Defrosting of inside wall P.21
Cleaning of air intake port P.22
REPLACEMENT OF WEAR-OUT PARTS P.23
Replacement of battery for power failure alarm P.23
Replacement of fan motor P.23
TROUBLESHOOTING P.24
DISPOSAL OF UNIT P.25
Recycle of battery P.25
Decontamination of unit P.25
TEMPERATURE RECORDER (OPTION) P.26
Setting of MTR-85H P.26
Setting of MTR-G85C P.28
BACKUP COOLING KIT (OPTION) P.30
INTERFACE BOARD (OPTION) P.32
Installation of MTR-480/MTR-L03 P.32
INVENTORY RACK (OPTION) P.33
SPECIFICATIONS P.34
PERFORMANCE P.35
SAFETY CHECK SHEET P.36
To Next Page
Loading...
