Panasonic MDF-U7586SC - Specifications

34
SPECIFICATIONS
Product name Ultra-Low Temperature Freezer
MDF-U5586SC
Ultra-Low Temperature Freezer
MDF-U7586SC
External dimensions W890 mm x D870 mm x H1990 mm W1130 mm x D870 mm x H1990 mm
Internal dimensions W630 mm x D600 mm x H1280 mm W870 mm x D600 mm x H1280 mm
Effective capacity 483 L 668 L
Exterior Painted steel
Interior Painted steel
Outer door Painted steel
Inner door ABS resin panel with stainless frame, 2 doors
Shelf Stainless steel, 3 shelves (adjustable)
W608 mm x D535 mm, Load; 50 kg/shelf
Stainless steel, 3 shelves (adjustable)
W848 mm x D533 mm, Load; 50 kg/shelf
Access port 17 mm diameter, 2 locations (back, bottom left corner)
Insulation Rigid polyurethane foamed-in place
Compressor Hermetic type, Output; 1100 W (high stage side), 1100 W (low stage side)
Evaporator Tube on sheet type
Condenser Fin and tube type (high stage side), Shell and tube type (low stage side)
Refrigerant R-404A (high stage side), R-508B (low stage side)
Temperature controller Microcomputer control system
Temperature display Digital display
Thermal sensor
Platinum resistance (Pt 1000Ω)
Alarm High temp. alarm, Low temp. alarm, Power failure alarm
Filter check, Battery check, Fan motor check
Remote alarm contact Allowable contact capacity: DC 30 V, 2 A
Battery Nickel-metal-hydride battery, DC 6 V, 1100 mAh, Auto-recharge
Accessories
1 set of key, 1 scraper, 1 s
tick for air intake port cleaning
Weight
320 kg 365 kg
Voltage booster Built-in
Optional component Inventory rack (IR-220U)
Temperature recorder + Recorder fixing (MTR-G85C*, MTR-85H+MDF-S3085)
Backup cooling kit (CVK-UB2/CVK-UB2I): LCO
2,
(CVK-UBN2): LN
2
Interface board (MTR-480, MTR-L03)
Data acquisition system (MTR-5000)
Note:
• Design or specifications will be subject to change without notice.
• Refer to the updated catalog when ordering an optional component.
*: Power source of the temperature recorder shall be 220 V.
• When a data transmitting function to the PC is done, an interface board MTR-480 (option) and
communication cable of 9 pin Dsub cross type for RS232C are necessary.
•
The connecting cable between the PC and MTR-L03 terminal is not enclosed. Provide a cross type
cable of less than 100 m length having a pin plug.