EN7
English
Motor housing
Wipe motor housing with a well wrung-out cloth.
The safety lock has been designed to prevent the blender from
switching on when blender jug or mill container is not properly in place.
Ɣ
8QSOXJWKHDSSOLDQFHEHIRUHFOHDQLQJ
Ɣ
&OHDQWKHSDUWVWKRURXJKO\DIWHUHYHU\XVH.HHSDOOSDUWVFOHDQDQGGU\DOZD\V
Ɣ
'RQRWZDVKDQ\SDUWRIWKHDSSOLDQFHLQWKHGLVKZDVKHU
Ɣ
'RQRWXVHEHQ]LQHWKLQQHUEOHDFKDOFRKROQ\ORQIDFHRIVSRQJHPHWDOEUXVKHVRUSROLVKSRZGHUHWF
Ɣ
6RPHGLVFRORUDWLRQRIWKHSODVWLFSDUWVPD\RFFXUXSRQXVDJHEXWLWGRHVQRWDIIHFWXVDJH
In case of overload and overheating, the protection device is triggered to stop operation and it is not abnormal.
After rotation stops, follow the below steps:
Ɣ
'RQRWXVHWKHDSSOLDQFHUHSHDWO\ZLWKRXWDQ\FRXQWHUPHDVXUH
1
7XUQWKHURWDU\VZLWFKWRSRVLWLRQXQSOXJWKHDSSOLDQFH
2
Remove blender jug or mill container from motor housing.
Reduce the ingredients to less than half. (For blender jug, it also can add liquid.)
Ɣ
5HPRYHWKHSURKLEWHGLQJUHGLHQWLIXVHG
3
Reset the blender jug or mill container, start blending again.
3(1
If the appliance still does not operate after performing the above, overheating protection has been activated.
7XUQWKHURWDU\VZLWFKWRSRVLWLRQXQSOXJDQGUHVWWKHDSSOLDQFHIRUDERXWPLQXWHVRUPRUHXQWLOPRWRUKRXVLQJUHWXUQVWRD
normal temperature) to release overheating protection before using again.
,IDSSOLDQFHVWLOOGRHVQRWRSHUDWHFRQWDFW3DQDVRQLF6HUYLFH&HQWUHIRULQVSHFWLRQRUUHSDLU
6DIHW\ORFNSLQ
Other parts
Wash each part in cold or lukewarm water with a soft sponge.
Rinse and dry thoroughly.
Cleaning and Care
Safety Lock
Overload and Overheating Protection
Blender jug and mill blade
Wash each part in cold or lukewarm water with a soft sponge.
Rinse and dry thoroughly.
Ɣ
5HPRYHWKHPLOOJDVNHWEHIRUHZDVKLQJ
Ɣ
$URXQGWKHEODGHFDUHIXOO\FOHDQZLWKDEUXVKXQGHUUXQQLQJ
ZDWHU%UXVKLVQRWSURYLGHG
Blender jug prewash
$GGP/FOHDQZDWHULQWRWKHEOHQGHUMXJSOXJLQDQGEOHQGIRUDERXWPLQXWH
Storing
Ɣ
$VVHPEOHWKHPLOOFRQWDLQHUEDVHZLWKWKHPLOOFRQWDLQHU
Ɣ
'U\WKHOLGWKRURXJKO\WKHQNHHSLWVHSDUDWHO\