To Next PageTo Next PageWhat to do if there are residues of detergent on the clothes after washing with my Panasonic Washer?
The pieces of some detergents which do not dissolve in water may stick to clothes as white stains. By calibrating the machine for the rinsing program, make an additional rinsing or eliminate the stains after drying with the help of a brush.
What to do if the door does not open on my Panasonic NA-127VB3 Washer?
If the door of your Panasonic Washer won't open, the door lock may be activated, so check if the door lock is activated. Alternatively, the water temperature or level may be too high; wait for the temperature or level to decrease.
Why is my Panasonic NA-127VB3 machine not operating?
Your Panasonic Washer might not be operating due to several reasons. It could be unplugged, so ensure it is properly inserted into the socket. The fuse might be defective and needs changing. Check if you've pressed the Start/Pause button. Also, the program knob should be on the desired setting, not in the '0' (off) position. Ensure the door is properly shut until you hear a click. Finally, the child lock might be active; refer to section 6.5 for deactivation instructions.
Why is my Panasonic NA-127VB3 not draining water?
If your Panasonic Washer isn't draining water, the drain hose might be obstructed or bent, so check it. Also, the pump filter could be obstructed, and it needs cleaning. Ensure that clothes are placed inside the machine in a well-balanced manner.
How to reduce excessive foam in my Panasonic NA-127VB3?
If there's too much foam in your Panasonic Washer, it could be due to the water's temperature, level, or softness. Try to ensure correct water conditions. You might also be using too much detergent, so reduce the amount. The type of detergent could also be the culprit, so consider changing to a low-foam detergent.
Why are there grey stains on the clothes after washing in my Panasonic NA-127VB3?
Grey stains on clothes after washing in your Panasonic Washer may be caused by oil, cream, or ointment. In the next washing operation, use the maximum detergent amount declared by the detergent producer.
Why is the washing result not good in my Panasonic NA-127VB3 Washer?
A not-so-good washing result in your Panasonic Washer can stem from a few reasons. You might have filled the machine with clothes exceeding its maximum capacity, so ensure you don't overload it. Hard water could be the culprit, so adjust the detergent amount as per the detergent producer's instructions. Also, make sure the clothes are spread evenly inside the machine for a well-balanced distribution.
Why does the spinning process start with delay on my Panasonic NA-127VB3?
The delayed spinning process in your Panasonic Washer is not a failure. The unbalanced load control system is designed to distribute clothes evenly. Once the clothes are distributed, the spinning process will begin. For the next wash, ensure clothes are placed in the machine in a well-balanced manner.
Why do foam and water remain in the door of my Panasonic NA-127VB3 Washer?
If foam and water remain in the door or door seal of your Panasonic Washer, although some foam and water might remain depending upon the state of the laundry and the amount of detergent used, the performance of the rinse cycle is unaffected, so no action is needed.
Why does fabric softener overflow in my Panasonic NA-127VB3?
If fabric softener overflows in your Panasonic Washer, it might be because the softener level exceeded the MAX level for the detergent drawer. Make sure you do not exceed the MAX level. You may have also spilled the liquid by closing the detergent drawer too strongly, so close the detergent drawer gently.
General| Water consumption per cycle | 50 L |
|---|---|
| Energy consumption washing per cycle | - kWh |
| Display type | LED |
| Loading type | Front-load |
| Product color | White |
| Appliance placement | Freestanding |
| Washing class | B |
| Drum capacity | 7 kg |
| Maximum spin speed | 1200 RPM |
| Noise level (wash) | 58 dB |
| Number of washing programs | 12 |
Weight and Dimensions| Depth | 527 mm |
|---|---|
| Width | 597 mm |
| Height | 845 mm |
| Weight | 73000 g |
Proper disposal and recycling information for washing machine packaging.
Tips for saving energy and water during washing cycles.
Recommended use of detergents and water softening agents.
Essential safety guidelines for the general operation of the washing machine.
Precautions for safe handling of the power cord, plug, and electrical connections.
Measures to prevent personal injury during appliance use and maintenance.
Safety advice on appliance location and avoiding potential hazards.
Specific warnings to prevent appliance damage and ensure user safety.
Identification of the main parts and features of the washing machine.
Details of all accessories included with the washing machine.
Procedures for initial checks and setup before operating the machine.
Guidelines for preparing and sorting laundry for optimal wash results.
Instructions for correctly using the detergent compartment for various additives.
Specific guidance on using liquid detergent, including prewash function notes.
Factors affecting detergent quantity and recommendations for low-suds types.
Instructions for adding powdered detergent and preventing drawer clogs.
How to add fabric softener and laundry starch to the dedicated compartment.
Guidance on using the prewash compartment for specific washing programmes.
Detailed explanation of all buttons, dials, and indicators on the control panel.
Understanding the process and time indicators, and how the door locking mechanism works.
Step-by-step guide to loading laundry, selecting programmes, and starting a wash cycle.
Information on wash time variations and methods to set or disable the end-of-cycle buzzer.
Procedures for changing programme settings while a wash cycle is running.
Overview of each wash programme, its purpose, and maximum load capacity.
Data table showing energy consumption, water usage, and cycle times for each programme.
Comprehensive details on programme temperatures, rinses, and approximate cycle lengths.
Information on spin speed, preset timer, and extra rinse options for programmes.
Specific guidance for washing wool items, including detergent use and drying methods.
Instructions for washing bedding items, including load limits and folding techniques.
How to activate and utilize the Extra Rinse and Child Lock features.
Instructions for setting a delayed start time for washing cycles.
Routine cleaning procedures for the washing machine's exterior and door seal.
Step-by-step guide for cleaning the drain filter to ensure proper water drainage.
Methods for cleaning the drum to prevent bacteria buildup and eliminate odors.
Instructions for removing and cleaning the detergent drawer and its components.
Detailed steps for cleaning detergent drawers based on type A and type B configurations.
How to clean the water supply filter to ensure adequate water flow.
Measures to prevent the water supply hose from freezing in cold weather conditions.
Troubleshooting common problems with buttons, door, and water supply.
Diagnosing faults related to rinsing, spinning, and unbalanced loads.
Solutions for issues involving excessive foam, softener overflow, and detergent residue.
Troubleshooting time display changes, abnormal noises, and power supply issues.
Explanations and solutions for specific error codes like E01, E02, E03, E04.
Criteria for choosing a suitable and safe place for the washing machine installation.
Guidelines for space, stability, and built-in unit installation requirements.
Procedures for removing anchor bolts and safely relocating the washing machine.
Steps for installing anchor bolts and ensuring the appliance is properly levelled.
Instructions for connecting the water supply hose to the tap and appliance correctly.
Details on the leak-proof system and proper connection of the water drain hose.
Guidance on safely connecting the appliance to the main electrical power supply.
A comprehensive checklist to confirm all installation steps are correctly completed.
Key technical data including voltage, power, dimensions, and load capacities.
Contact details for customer communications and support services.
