Panasonic NA-127VB5WGB

Panasonic NA-127VB5WGB

53 pages

To Next Page

To Next Page

Loading...

© Panasonic Corporation 2013 Unauthorized copy-

ing and distribution is a violation of law.

Order No. VES1309006CE

Drum Type Washing Machine

Model No. NA-127VB5WGB

Model No. NA-127VB5WFR

Model No. NA-127VB5WES

Model No. NA-127VB5WTA

Model No. NA-127VB5WPL

Model No. NA-127VB5WGN

Model No. NA-127VB5WNR

Model No. NA-147VB5WDE

Model No. NA-147VB5WGB

Model No. NA-147VB5WGN

Model No. NA-147VB5WNR

Product Colour

White

Destination

Germany, UK, France, Belgium, Norway,

Italy, Spain, Hungary, Holland, Poland,

Sweden, Denmark, Finland

Questions and Answers:

D
dana71Aug 16, 2025
What to do if my Panasonic NA-127VB5WGB Washer does not operate?
- B
  Beth GuzmanAug 16, 2025
  If your Panasonic Washer isn't operating, there are several potential causes. First, ensure the washer is plugged into the socket. Check the fuse and replace it if defective. Make sure you've pressed the start/pause button and that the program knob is not in the off position. Also, verify that the door is properly shut until you hear a click. Finally, check if the child lock is active; if so, refer to section 5.3 for deactivation instructions.
K
Kayla MoodyAug 19, 2025
Why is my Panasonic NA-127VB5WGB Washer not receiving water?
- M
  Mr. Jerry JohnsonAug 19, 2025
  If your Panasonic Washer isn't receiving water, start by checking if the water tap is fully open. Inspect the water inlet hose for any bends that might be restricting water flow. Also, the water inlet hose or valve inlet filters could be obstructed, so clean them. Finally, ensure the door is properly shut until you hear a click.
C
Cynthia RobinsonAug 21, 2025
How to fix a Panasonic NA-127VB5WGB that is not draining water?
- K
  Keith Anderson Jr.Aug 22, 2025
  If your Panasonic Washer isn't draining water, examine the drain hose for any obstructions or bends. Additionally, the pump filter might be clogged, so clean it. Also ensure that the clothes are placed inside the machine in a well-balanced manner.
K
Kyle EstesAug 25, 2025
Why is my Panasonic Washer vibrating so much?
- M
  matthew20Aug 26, 2025
  If your Panasonic Washer is vibrating excessively, the feet of the machine may not be properly adjusted, so adjust them. Also, ensure that the transportation screws have been removed. A small amount of clothes won't prevent operation of the machine. Avoid filling excessive amount of clothes in the machine or ensure clothes are placed in a well-balanced manner.
J
jacobsmichaelAug 27, 2025
Why is the spinning process not done or starts with delay in my Panasonic NA-127VB5WGB Washer?
- A
  amandakingAug 28, 2025
  The spinning process may be delayed in your Panasonic Washer because the unbalanced load control is working. The unbalanced load control system will try to distribute clothes in a homogenous manner. After clothes are distributed, passage to spinning process will be realized. In the next washing process, place clothes into the machine in a well-balanced manner.
R
Ryan HillAug 30, 2025
What to do if there is excessive foam in the detergent drawer of my Panasonic NA-127VB5WGB Washer?
- J
  Jennifer JacksonAug 30, 2025
  If you observe excessive foam in the detergent drawer of your Panasonic Washer, it's likely due to using too much or the wrong type of detergent. Press the start/pause button to stop the foam, then dilute one tablespoon of softener in half a liter of water and pour it into the detergent drawer. After 5-10 minutes, press the start/pause button again. In the future, use only detergents produced for full automatic machines and adjust the amount of detergent used properly.
K
Kimberly OwensSep 2, 2025
Why is the washing result bad with my Panasonic NA-127VB5WGB Washer?
- D
  Darren SimpsonSep 3, 2025
  If the washing result is bad with your Panasonic Washer, it could be because the laundry is too dirty for the selected program, so select a suitable program. Alternatively, the amount of detergent used might not be sufficient, so use more detergent according to the detergent instructions.
R
Reginald WeaverSep 5, 2025
Why is the washing result not good in my Panasonic NA-127VB5WGB?
- A
  Alyssa BrowningSep 6, 2025
  If the washing result isn't good in your Panasonic Washer, it might be due to overloading the machine with clothes, so put the clothes in machine in a manner not to exceed its maximum capacity. Hard water could also be a factor, so use the amount of detergent according to the declaration of the detergent producer. Also ensure that the distribution of the clothes in machine is well-balanced, so spread the clothes inside the machine in an orderly and well-balanced manner.
T
Tara JacobsSep 9, 2025
Why are there residues of detergent on the clothes after washing in my Panasonic NA-127VB5WGB Washer?
- W
  wwatsonSep 9, 2025
  If you notice detergent residues on your clothes after washing with your Panasonic Washer, it's likely due to undissolved detergent particles sticking to the fabric as white stains. By calibrating machine for [Rinsing] program, make an additional rinsing or eliminate the stains After drying with the help of a brush.
T
Theresa PorterSep 12, 2025
Why are there grey stains on the clothes after washing in my Panasonic NA-127VB5WGB?
- J
  James NelsonSep 12, 2025
  If you find grey stains on clothes washed in your Panasonic Washer, these stains may be caused by oil, cream or ointment. In the next washing operation, use the maximum detergent amount declared by the detergent producer.

Panasonic NA-127VB5WGB Specifications

General

Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Door hinge	Left
Control type	Rotary
Display type	LCD
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Washing class	A
Drum capacity	7 kg
Maximum spin speed	1200 RPM
Number of washing programs	-

Weight and Dimensions

Depth	527 mm
Width	597 mm
Height	845 mm
Door diameter	330 mm

Summary

Safety Precautions

Installation Instructions

Moving and Installing the Appliance

Guidance on relocating and setting up the washing machine for safe operation.

Removing Transportation Screws

Step-by-step instructions for safely removing shipping screws.

Adjusting the Feet for Leveling

Procedure for leveling the washing machine using its adjustable feet.

Electrical Connection Safety

Essential guidelines for safely connecting the appliance to the power supply.

Water Supply Connection Procedure

Instructions for correctly connecting the water inlet hose to the machine.

Drain Connection Setup

Guidance on properly positioning and connecting the drain hose.

Operating Instructions

Control Panel and Display Guide

Overview of the LCD screen, function buttons, and rotary knob controls.

Wash Program Details

Child Lock Activation and Deactivation

Service Mode

Service Autotest Steps

Detailed procedure for entering and executing the service autotest.

Failure Codes and Indications

List of error codes, their user/service indications, and potential causes.

Troubleshooting Guide

Disassembly and Assembly Instructions

Top Plate Removal and Installation

Steps to remove and reattach the appliance's top panel.

Washing Machine Door Disassembly

Procedure for taking apart and reassembling the washing machine door.

Spring Wire Removal

Detergent Drawer Removal

Control Panel Disassembly

Procedure for removing the control panel and its associated components.

Electronic Card and Fuse Removal

Steps to remove the electronic PCB box and fuse.

Front Panel Disassembly

Instructions for removing the washing machine's front panel.

Support Bracket Removal

Detergent Drawer Housing Removal

Power Cable and EMI Filter Removal

Instructions for disconnecting the power cable and removing the EMI filter.

Electronic Pressure Switch (EPS) Removal

Door Lock Assembly Removal

Drain Pump Removal

Front Counterweight Removal

Heater Removal Procedure

Twinjet System Disassembly

Tub Bellow Seal Removal

Transport Screw Removal

Upper Counterweight Removal

Washing Group Removal

Shock Absorber Pin Removal

Driven Pulley Removal

Second Driven Pulley Removal

Motor Removal Procedure

Steps to remove the appliance motor using a box wrench.

Tub Disassembly Steps

Component Specifications

Drain Pump Specifications

Circulation Pump Specifications

Heater Specifications and Testing

NTC Sensor Specifications

Valve Specifications and Testing

Electronic Pressure Sensor (EPS) Specifications

Motor Specifications and Testing

Technical data and resistance testing for the motor's stator and tacho.

Door Lock Specifications

Details on the door lock mechanism, including PTC-bimetal and solenoid.

Wiring Connection Diagram

Board Wiring Diagram

Socket Wiring Diagram

Related product manuals

Panasonic NA-127VB5

Preview: Panasonic NA-127VB4

Panasonic NA-127VB4

Panasonic NA-127VB3

Panasonic NA - 127VB6

Preview: Panasonic NA 127VB7LEG

Panasonic NA 127VB7LEG

Preview: Panasonic NA-127VC5

Panasonic NA-127VC5

Panasonic NA - 127VC6

Preview: Panasonic NA-127XB1

Panasonic NA-127XB1

Preview: Panasonic NA-127XB1L01

Panasonic NA-127XB1L01

Panasonic NA-127MB1WAS

Preview: Panasonic NA-127MG2 Series

Panasonic NA-127MG2 Series

Panasonic NA-128VA2