Why don't the buttons on my Panasonic NA-120VG6 Washer work?
If the buttons on your Panasonic Washer aren't working, it could be because settings can't be changed while a wash cycle is in progress. Only the spin speed and “Extra Rinse” settings are adjustable when the process is paused. Alternatively, the Child Lock feature may be activated.
Why is no water going into my Panasonic Washer?
If your Panasonic Washer is not getting water, the tap might be turned off, the water supply could be disrupted, or the water supply hose may be frozen.
Why is water not supplied to the drum during the rinse process in my Panasonic NA-120VG6?
If water is not being supplied to the drum of your Panasonic Washer during the rinse process, it is because before rinsing, the appliance spins to drain out any UHPDLQLQJ, then it fills up with fresh water.
What to do if foam or water remains on the door or door seal of my Panasonic NA-120VG6 Washer?
If you notice foam or water on the door or door seal of your Panasonic Washer, wipe it away before removing your laundry.
Why does rinsing begin before the spin process finishes in my Panasonic NA-120VG6?
If rinsing starts before the spin process finishes in your Panasonic Washer, it is because the appliance detects an unbalanced load and automatically starts rinsing to correct the imbalance.
How to get rid of unusual odor in my Panasonic NA-120VG6?
To address an unusual odor from your Panasonic Washer, run the “Tub Clean” program to clean the drum.
General safety advice for users.
Important safety guidelines for users and children.
Precautions against electrical hazards and fire.
Proper usage guidelines for the washing machine.
Guidelines to avoid damaging the machine or clothes.
Instructions for ensuring the appliance is properly grounded.
Guidelines on when and how to perform appliance repairs.
Steps to prevent water leakage from the appliance.
Precautions to avoid personal injury and burns.
Step-by-step guide for basic washing operation.
Cleaning the water supply filter for proper water flow.
Instructions for cleaning the washing machine drum.
Removing and cleaning the drain filter to ensure proper drainage.
Cleaning the water supply filter for proper water flow.
Solutions for issues like buttons not working or door not opening.
Explains error codes like U11, U12, U13, U14.
Problems related to buttons, door, and unusual odour.
Problems during rinse, spin, and unbalanced loads.
Problems with fabric softener and residual detergent.
Problems with water supply, water build-up, and drainage.
Causes of unusual noise or vibration during operation.
Guidance on selecting a suitable installation site for the appliance.
How to properly connect water supply and drain hoses.
Information on how error messages are displayed.
Sites to avoid for installing the appliance.
Instructions for removing transit anchor bolts.
How to ensure the appliance is level using adjustable feet.
Performing a test run to confirm proper operation.
Checking for leaks at hose joints during the test run.
Checking for and resolving error displays during the test run.
General| Type | Front Load |
|---|---|
| Capacity | 12 kg |
| Spin Speed | 1200 rpm |
| Color | White |
| Washing Capacity | 12 kg |
| Water Level Selection | Yes |
| Child Lock | Yes |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Energy Rating | A+++ |
| Energy Efficiency Class | A+++ |
To Next Page