Maintenance
23
Water supply filter
If water does not flow smoothly
Tub
Once a week <Super Dry>
Once a month <Tub Hygiene>
z Follow the procedure below to
prevent splashing of water.
1
After turning off the
water faucet
Turn the power on.
2
Select Hot or
Warm.
3
Start.
4
After approx.
40 seconds
Turn the power off.
5
Loosen the nut and remove
the hose.
6
Remove the filter and remove
dirt on the filter.
Water supply filter
7
Reattach the filter to its
original position.
Preparation:
Turn on the water faucet.
1
Without loading
laundry
Turn the power on.
2
Press.
3
Start.
When the tub is
filled with water
Pause.
4
Put bleach in the tub.
z Use whiten bleach
(chlorine bleach).
5
After closing the lid
Start.
After approx. 2 hours and a
half, tub cleaning ends.
1
After operation ends
Run the “Super Dry” program
without loading laundry. (P. 18)
Approx. 200 ml
To Next Page
Loading...
