To Next PageTo Next PageHow to change process settings after start-up on Panasonic NA-F100A4?
If you cannot change the process settings on your Panasonic Washer after starting it, first ensure that the lid is completely closed. If the lid is closed and you still cannot change the settings, you can change the settings during the wash process by pressing “Pause”. To change the program or settings after the end of the wash process, turn the power off and on again.
Why does my Panasonic NA-F100A4 Washer change to rinse in the middle of spin?
If your Panasonic Washer suddenly changes to the rinse process during the spin cycle, it's likely because clothes are concentrated on one side of the tub. The machine automatically corrects this unevenness by starting the rinse process. To prevent this, try to place clothes as evenly as possible in the tub.
Why does the time indication increase or not change on my Panasonic NA-F100A4?
The time indication on your Panasonic Washer is approximate. The remaining time is corrected during operation and displayed.
Why is the operation time longer than the time indication on my Panasonic Washer?
The operation time of your Panasonic Washer may be longer than indicated if the laundry is concentrated on one side, or if the water supply or drainage is not optimal. Please consult the manual (P. 15 “U 11” “U 14”) for detailed solutions.
General| Type | Top Load Washer |
|---|---|
| Capacity | 10 kg |
| Dimensions | 560 x 600 x 1, 050 mm |
| Weight | 39 kg |
| Water Consumption | 150 L |
| Wash Programs | 9 |
| Fuzzy Control | Yes |
| Features | Child Lock |
| Water Level Settings | 5 levels |
