EasyManua.ls Logo

Panasonic NA-F100G3 - User Manual

Panasonic NA-F100G3
35 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Order No. PAPTH120701CE
(Revision : Jun. 2014)
Service Manual
Fully Automatic Washing Machine
NA-F80B3
NA-F80H3
NA-F90B3
NA-F90H3
NA-F90G3
NA-F100B3
NA-F100H3
NA-F100G3
NA-F1003B
NA-F1003H
NA-F1103G
© Panasonic Appliances (Thailand) Co., Ltd. 2012.
All rights reserved. Unauthorized copying and
distribution is a violation of law.
There are special components used in this equipment which are important for safety. These parts are marked by
in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that
these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do
not modify the original design without permission of manufacturer.
IMPORTANT SAFETY NOTICE
WARNING
The service information is designed for experienced repair technicians only and is not designed for use by the general
public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting
to service a product. Products powered by electricity should be serviced or repaired only by experienced professional
technicians. Any attempt to service or repair the product or products dealt within this service information by anyone
else could result in serious injury or death.
Product Colour
Grey
Destination
Thailand, Indonesia, Vietnam, Malaysia, India
Singapore (Local), Singapore (Export)
Philippines, UAE (Local), Kuwait
Qatar, Oman, Lebanon
UAE (PGF), Libya

Table of Contents

Questions and Answers

  • H
    Heather ThomasAug 16, 2025
    Why is my Panasonic NA-F100G3 Washer not operating?
    • A
      ashley14Aug 17, 2025
      If your Panasonic Washer is not starting, several factors could be at play. First, ensure the power plug is completely plugged in. Check if the power fuse or breaker has been cut off. Confirm that the lid is completely closed and that the 'Start' button has been pressed. Also, verify that the water faucet is turned on and that the 'Reserve' program hasn't been set. Power failure could also be the cause.
  • B
    Bradley DanielsAug 22, 2025
    Why is my Panasonic NA-F100G3 making an unusual loud noise?
    • M
      Melanie VincentAug 22, 2025
      If your Panasonic Washer is making an unusual loud noise, it may be related to the belt or motor. Check the installation of the washer.
  • K
    Kevin JacksonAug 25, 2025
    What to do if my Panasonic NA-F100G3 Washer is working incorrectly?
    • A
      Anthony ClarkAug 26, 2025
      If your Panasonic Washer is not working correctly, the tub might be unbalanced or leaning. Try adjusting the tub position to correct this. Alternatively, the air pipe could be clogged, so try clearing the air pipe.
  • R
    rodriguezjamieAug 28, 2025
    What to do if my Panasonic Washer has a water leak?
    • D
      donna01Aug 28, 2025
      If you notice a water leak from your Panasonic Washer, the issue might stem from a clog. Inspect the drain pipe for any obstructions. Also, examine the bottom of the machine, focusing on the drain pipe and pulsator, for potential problems.
  • J
    Jose HernandezAug 30, 2025
    Why is there an unusual amount of water inside my Panasonic NA-F100G3 Washer?
    • G
      Gary NewmanAug 30, 2025
      If you find an unusual amount of water inside your Panasonic Washer, the water inlet valve might be the cause. Check the water supply.
  • M
    Mary DavisSep 2, 2025
    What to do if the Panasonic NA-F100G3 operation started with Rinse process, however, water is not supplied?
    • A
      Amanda JordanSep 2, 2025
      If the operation of your Panasonic Washer started with the Rinse process, but water isn't being supplied, water will be supplied after the spin cycle if the tub is empty. If there is water in the tub, water is supplied after water discharge.
  • M
    Matthew WernerSep 4, 2025
    What happens if there is a power failure with my Panasonic NA-F100G3?
    • C
      Christy AvilaSep 5, 2025
      If the power fails or the breaker trips while using your Panasonic Washer, the operation will stop. When power is restored, the operation will resume automatically, and the 'Auto Restart' indicator will light up. After water supply is recovered, remove the water supply hose to release muddy water from the faucet, and start the operation.
  • D
    davischristianSep 8, 2025
    Why does my Panasonic Washer suddenly change to rinse process in the middle of spin process?
    • W
      whaydenSep 8, 2025
      If your Panasonic Washer suddenly changes to the rinse process in the middle of the spin process, it's likely because the laundry is unevenly placed in the tub. The machine automatically corrects the arrangement by starting to rinse. Make sure to distribute the laundry as evenly as possible.
  • P
    paige80Sep 10, 2025
    Why is there no water supply to my Panasonic NA-F100G3?
    • L
      lisa56Sep 12, 2025
      If your Panasonic Washer isn't filling with water, start by checking if the water faucet is turned on and if the lid is properly closed. Consider whether there might be a water failure in your area. Additionally, inspect the water supply filter for any clogs caused by dust.
  • S
    Steven CuevasSep 12, 2025
    How to change the operation contents after start on my Panasonic NA-F100G3 Washer?
    • W
      Whitney KellySep 12, 2025
      If you cannot change the operation contents of your Panasonic Washer after starting a cycle, you can change the contents during the 'Wash' process by pressing 'Pause'. To change the course or contents after the 'Rinse' process, turn the power off and then on again.

Summary

Repair Work Security Attention

Washing Machine Specifications

Specifications for NA-F80 B3 to NA-F1103 G Models

Detailed specifications for specific washing machine models.

Specifications for NA-F100 B3 to NA-F100 G3 Models

Detailed specifications for specific washing machine models.

Installation Guide

Washing Machine Operations Panel

Operations Panel for NA-F80 B3;NA-F90 B3;NA-F100 B3;NA-F1003 B

Operations Panel for NA-F80 H3;NA-F90 H3;NA-F100 H3;NA-F1003 H

Operations Panel for NA-F90 G3;NA-F100 G3;NA-F1103 G

Wiring Diagrams

Wiring Diagram for H, B Series

Wiring Diagram for G Series

Error Codes and Indications

Error Code Symptoms and Explanations

Explains error codes displayed by the washing machine and their corresponding symptoms.

Inspection Indicators and Conditions

Details on system inspection indicators and their specific diagnostic conditions.

Troubleshooting Symptoms

Non-Trouble Symptoms and Checkpoints

Parts Exploded Views and Lists

Replacement Parts List for Part A (Models NA-F80 B3 to NA-F1103 G)

Comprehensive list of replacement parts for Part A across multiple models.

Replacement Parts List for Part A (Models NA-F100 B3 to NA-F100 G3)

Detailed replacement parts list for Part A specific to certain washing machine models.

Replacement Parts List for Part B (Models NA-F80 B3 to NA-F1103 G)

Comprehensive list of replacement parts for Part B across multiple models.

Replacement Parts List for Part B (Models NA-F100 B3 to NA-F100 G3)

Detailed replacement parts list for Part B specific to certain washing machine models.

Replacement Parts List for Part C (Models NA-F80 B3 to NA-F1103 G)

Replacement Parts List for Part C (Models NA-F100 B3 to NA-F100 G3)

Replacement Parts List for Packing Parts (Models NA-F80 B3 to NA-F1103 G)

Panasonic NA-F100G3 Specifications

General IconGeneral
Capacity10 kg
Spin Speed1000 RPM
Voltage220 V
Frequency50 Hz
Power Consumption400 W
TypeTop Load

Related product manuals