EasyManua.ls Logo

Panasonic NA-F100H3 - User Manual

Panasonic NA-F100H3
35 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Order No. PAPTH120701CE
(Revision : Jun. 2014)
Service Manual
Fully Automatic Washing Machine
NA-F80B3
NA-F80H3
NA-F90B3
NA-F90H3
NA-F90G3
NA-F100B3
NA-F100H3
NA-F100G3
NA-F1003B
NA-F1003H
NA-F1103G
© Panasonic Appliances (Thailand) Co., Ltd. 2012.
All rights reserved. Unauthorized copying and
distribution is a violation of law.
There are special components used in this equipment which are important for safety. These parts are marked by
in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that
these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do
not modify the original design without permission of manufacturer.
IMPORTANT SAFETY NOTICE
WARNING
The service information is designed for experienced repair technicians only and is not designed for use by the general
public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting
to service a product. Products powered by electricity should be serviced or repaired only by experienced professional
technicians. Any attempt to service or repair the product or products dealt within this service information by anyone
else could result in serious injury or death.
Product Colour
Grey
Destination
Thailand, Indonesia, Vietnam, Malaysia, India
Singapore (Local), Singapore (Export)
Philippines, UAE (Local), Kuwait
Qatar, Oman, Lebanon
UAE (PGF), Libya

Table of Contents

Questions and Answers

  • K
    Krystal PayneAug 16, 2025
    Why is my Panasonic Washer not operating?
    • M
      Mary FergusonAug 17, 2025
      If your Panasonic Washer is not starting, several factors could be at play. First, ensure the power plug is completely plugged in. Check if the power fuse or breaker has been cut off. Confirm that the lid is completely closed and that the 'Start' button has been pressed. Also, verify that the water faucet is turned on and that the 'Reserve' program hasn't been set. Power failure could also be the cause.
  • N
    nelsonkyleAug 19, 2025
    Why is there no water supply to my Panasonic NA-F100H3 Washer?
    • E
      Edward BirdAug 20, 2025
      If your Panasonic Washer isn't filling with water, start by checking if the water faucet is turned on and if the lid is properly closed. Consider whether there might be a water failure in your area. Additionally, inspect the water supply filter for any clogs caused by dust.
  • A
    abushAug 22, 2025
    Why is my Panasonic NA-F100H3 making an unusual loud noise?
    • B
      Brian GreeneAug 22, 2025
      If your Panasonic Washer is making an unusual loud noise, it may be related to the belt or motor. Check the installation of the washer.
  • B
    Brittany YoungAug 25, 2025
    What to do if my Panasonic NA-F100H3 Washer is working incorrectly?
    • J
      Jonathan SmithAug 26, 2025
      If your Panasonic Washer is not working correctly, the tub might be unbalanced or leaning. Try adjusting the tub position to correct this. Alternatively, the air pipe could be clogged, so try clearing the air pipe.
  • A
    Adam FitzgeraldAug 27, 2025
    What to do if my Panasonic NA-F100H3 has a water leak?
    • M
      marcus92Aug 28, 2025
      If you notice a water leak from your Panasonic Washer, the issue might stem from a clog. Inspect the drain pipe for any obstructions. Also, examine the bottom of the machine, focusing on the drain pipe and pulsator, for potential problems.
  • M
    melissa41Aug 30, 2025
    Why is there an unusual amount of water inside my Panasonic NA-F100H3?
    • T
      Tiffany JohnstonAug 30, 2025
      If you find an unusual amount of water inside your Panasonic Washer, the water inlet valve might be the cause. Check the water supply.
  • S
    Samantha WhiteSep 2, 2025
    What to do if the Panasonic Washer operation started with Rinse process, however, water is not supplied?
    • M
      Marie WilsonSep 2, 2025
      If the operation of your Panasonic Washer started with the Rinse process, but water isn't being supplied, water will be supplied after the spin cycle if the tub is empty. If there is water in the tub, water is supplied after water discharge.
  • M
    Michael RobertsonSep 5, 2025
    What happens if there is a power failure with my Panasonic NA-F100H3 Washer?
    • B
      Billy MontgomerySep 5, 2025
      If the power fails or the breaker trips while using your Panasonic Washer, the operation will stop. When power is restored, the operation will resume automatically, and the 'Auto Restart' indicator will light up. After water supply is recovered, remove the water supply hose to release muddy water from the faucet, and start the operation.
  • V
    Vanessa Smith MDSep 7, 2025
    Why does my Panasonic NA-F100H3 Washer suddenly change to rinse process in the middle of spin process?
    • D
      Dennis FrySep 7, 2025
      If your Panasonic Washer suddenly changes to the rinse process in the middle of the spin process, it's likely because the laundry is unevenly placed in the tub. The machine automatically corrects the arrangement by starting to rinse. Make sure to distribute the laundry as evenly as possible.
  • N
    Nicolas PughSep 10, 2025
    How to change the operation contents after start on my Panasonic NA-F100H3 Washer?
    • R
      Rachel WolfeSep 12, 2025
      If you cannot change the operation contents of your Panasonic Washer after starting a cycle, you can change the contents during the 'Wash' process by pressing 'Pause'. To change the course or contents after the 'Rinse' process, turn the power off and then on again.

Summary

ATTENTION IN THE REPAIR WORK SECURITY

SPECIFICATIONS

NA-F80 B3; NA-F80 H3; NA-F90 B3; NA-F90 H3; NA-F90 G3; NA-F1003 B; NA-F1003 H; NA-F1103 G

NA-F100 B3; NA-F100 H3; NA-F100 G3

INSTALLATION

Checking of placement

Procedures for verifying the washing machine's installation location.

Connect the water supply hose

Steps for correctly attaching the water supply hose to the machine.

Install Washing Machine to steady

Instructions for ensuring the washing machine is stable and level.

OPERATIONS PANEL

NA-F80 B3; NA-F90 B3; NA-F100 B3; NA-F1003 B

NA-F80 H3; NA-F90 H3; NA-F100 H3; NA-F1003 H

NA-F90 G3; NA-F100 G3; NA-F1103 G

TABLE OF ERRORS

Error Indication

List of error codes and their corresponding symptoms and checks.

Inspection Indication

Codes indicating specific component or system abnormalities.

TROUBLESHOOTING

Table of Troubleshooting

Comprehensive table of problems, corresponding devices, and checks.

DISASSEMBLY INSTRUCTION

Remove Screws of Back Panel out

Steps to remove screws securing the back panel.

Remove Back Panel out

Procedure for detaching and removing the back panel.

PARTS EXPLODED VIEW AND REPLACEMENT PARTS LIST

Parts Exploded View: Part A

Replacement Parts List: Part A

Parts Exploded View: Part B

Replacement Parts List: Part B

Parts Exploded View: Part C

Replacement Parts List: Part C

Panasonic NA-F100H3 Specifications

General IconGeneral
Washing Capacity10 kg
TypeTop Load
ColorWhite
Foam SensorYes
Imbalance ControlYes
Frequency50 Hz
Water Pressure0.03 - 1 MPa
Voltage220 V

Related product manuals