Why my Panasonic Washer does not run at all?
If your Panasonic Washer isn't running, first ensure the power plug is fully inserted. Then, check your power fuse and breaker. Also, make sure the water faucet is turned on and that you've pressed the START/HOLD button. Finally, verify that the machine hasn't been programmed under the RESERVE timer.
How to fix Panasonic Washer when water is not supplied?
If water is not being supplied to your Panasonic Washer, start by checking if the water faucet is turned on and if the water supply has been cut off. Also, inspect the water supply hose connection for any clogs with dirt. Ensure that the lid is closed properly.
What to do if buzzer sounds and draining when opening the lid during wash and rinse on Panasonic NA-F1011T Washer?
If your Panasonic Washer buzzer sounds and drains when you open the lid during wash and rinse, it's likely due to the CHILD LOCK mode being activated. To resolve this, unplug the power cord from the outlet, wait 5 seconds, and then plug it back in.
Details connecting water supply hose and ensuring no leaks.
Step-by-step guide for connecting the water supply hose to the tap adaptor.
Instructions for adjusting machine legs for levelness and stability.
Lists common error codes, their causes, and solutions.
Addresses issues like no dial light, no water sound, or machine not starting.
Step-by-step guide on removing screws from the back panel.
Instructions on detaching the back panel after screw removal.
Exploded view diagram showing the location of parts labeled 'A'.
Detailed list of part names, numbers, and country availability for Section A.
Lists replacement parts for Section A, detailing model-specific availability.
General| Type | Top Load Washer |
|---|---|
| Capacity | 10 kg |
| Spin Speed | 650 RPM |
| Dimensions (W x D x H) | 600 x 600 x 1000 mm |
| Wash Programs | 10 |
| Frequency | 50 Hz |
| Motor | Inverter |
| Voltage | 220 V |
To Next Page