Panasonic NA-F1011T

8
4. OPERATIONS PANEL
Operations Panel
Fuzzy logic control is used to recommend the proper water level and amount of detergent for the amount of laundry being done.
Caution: If you need to change the [PROGRAM] and [SOAK] settings after the cycle has already started, turn the power off and on it back.
4.1 Model NA-F80B1 / NA-F80T1 / NA-F90T1 / NA-F1011T
RESERVE
• Press the [RESERVE] button to set how many
hours later you would like the wash to be completed.
SOAK (EXCEPT NA-F80B1)
• Operations course for heavily washed laundry. • You can adjust soak time based on the
condition of dirt.
• You can choose your soak time from 1, 3, 5, 8 hours.
OFF/ON
• The power automatically turns off when total
operations is fi nished.
• The power automatically turns off if [START/
HOLD] button is not pressed within 10 minutes after turning on the power.
WASH/SPIN
• Press this button, and the pre-set laundry
cycle display will turn off allowing you to choose your own laundry setting.
WATER LEVEL (Water volume display)
• The appropriate WATER LEVEL for the size
and type of your laundry will be displayed.
• You can adjust the WATER LEVEL according
to your desired level.
RINSE
• Press this button, and the pre-set laundry
cycle display will turn off allowing you to choose your own laundry setting.
• At “REFILL” selection, water will be supplied
while “RINSE” process is in operation.
Time display
• When the machine is in operation, the time
display shows how much time (in minutes) is left.
• When the programmable timer has been
set, this display shows how much time is left until the wash is fi nished by pressing the [RESERVE] button.
• Timer indication on the panel will show longer
time than selected time as it includes water feeding, draining, etc.
START/HOLD
• Press this to start. • Press this to stop in the middle of the cycle.
PROGRAM (Course Select)
• According to type of laundry and stain, you
can select suitable course yourself.